Sharp IG-DX10A

ENGLISH
E-13
SPECIFICATIONS
* The applicable fl oor area for which an emitted airborne ion density of about 25,000 ions/
cm
3
can be measured at a point near the center of the room (at a height of about 1.2m
from the fl oor), during operation at the HIGH mode when the main unit is placed near a
wall.
•
The quantity of ions varies depending on the condition of room and the usage.
•
Operating temperature : 0
°C to 35 °C.
IG-DX10A
AC adapter
AC220V, 50Hz
DC12V 1.5A
Approx. 10 m
2
LOW
7,000
0.7 m
3
/min
4W
26dB
HIGH
25,000
1.0 m
3
/min
7W
39dB
FULL POWER
37,500
1.4 m
3
/min
13W
44dB
120mm(W) x 270mm(H) x 270mm(D)
(Excluding rubber leg / protrusion)
Approx. 1.8kg
Approx. 1.8m
Model
Power supply
Power input
Power output
Applicable fl oor area *
Operation mode
Ion density
(ions/cm
3
)
Rated airfl ow
Power consumption
Operating noise level
Outer dimensions
Weight
Length of cord
IG-DX10A.EN.indd15IG-DX10A.EN.indd15 2011/11/0710:59:532011/11/0710:59:53