EasyManua.ls Logo

Sharp LC-32LE700E - Page 58

Sharp LC-32LE700E
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LC-32/40/46LE700E/RU/S,LU700E/S,LX700E/RU,LC-52LE700E/RU/S
6 – 13
[External input EXT3] No picture on the display (7)
Does not the picture of the component video signal input to EXT3 go out?
Is a COMPONENT video signal input to pins (3)/Y, (5)/Pb, (7)/Pr
of EXT3 (J503)?
NO Check the setting of an external input device that connects with
EXT3.
YES
Is COMP_PLUG detection signal to (AF7/COMP_PLUG) of
IC3302 (Digital AV decode & Main CPU) input from pin(2) of
EXT3 (J503)?
NO Check the line between IC3302 and J503.
YES
Is COMPONENT signal sent to pins (AJ18/COMP__Y), (AJ19/
COMP__Pb) and (AH19/COMP__Pr) of IC3302
NO Check the line between IC3302 and J503.
YES
Refer to “The picture doesn't appear in all modes.”
[External input EXT4] No picture on the display (8)
Does not the picture of the DVI (ANALOG) video signal input to EXT4 (15pin-D-SUB terminal) go out?
Are the video signal and the synchronized signal input from
pin(1, 2, 3)/(R, G, B), (14 and 13)/(V, H.Sync) of EXT4 (SC501)?
NO Check the connection and setup with the external DVI devices.
YES
Are the video signal and the synchronized signal input from pins
(AK17/PC__R) (AK16/PC__G)(AH15/PC__B) and (AK14/
PC_HSYNC) (AJ14/PC_VSYNC) of IC3302
(Digital AV decode & Main CPU)?
NO Check the line between SC501 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.”
[External input EXT8] No picture on the display (9)
Does not the picture of the CVBS signal input to EXT8 go out?
Is a CVBS signal input to pin (6) of EXT8 (J505)? NO Check the setting of an external input device that connects with
EXT8.
YES
Is V3_PLUG detection signal input to pin (AJ1/CVBS_PLUG) of
IC3302 (Digital AV decode & Main CPU) from pin(7) of EXT8
(J505)?
NO Check the line between J505 and IC3302.
YES
Is CVBS signal sent to pin (AE29/CVBS__IN) of IC3302? NO Check the line between J505 and IC3302.
YES
Refer to “The picture doesn't appear in all modes.”

Related product manuals