EasyManuals Logo

Sharp LC-40LB480U User Manual

Sharp LC-40LB480U
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
66
LC-32LB370U/LC-50LB370U Sharp 32"/50" LED TV
Only snow (noise)
appears on the
screen.
Try another channel. The station
may be experiencing problems.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on page 14
or “Connecting an antenna or
cable TV (no box)” on page 18.
If you are using an antenna, the
digital channel signal may be low.
To check the digital channel
signal strength, see “Checking
the digital signal strength” on
page 52.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Picture quality is
good on some
channels and poor
on others. Sound
is good.
The problem may be caused by a
poor or weak signal from the
broadcaster or cable TV provider.
If you connect to cable or satellite
TV without a set-top box and
experience poor picture quality,
you may need to install a set-top
box to improve signal reception
and picture quality. Contact your
cable or satellite TV provider
about upgrading to a set-top box.
Problem Solution
Dotted lines or
stripes appear on
the screen.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on page 14
or “Connecting an antenna or
cable TV (no box)” on page 18.
If you are using an antenna, the
digital channel signal may be low.
To check the digital channel
signal strength, see “Checking
the digital signal strength” on
page 52.
If you are using an antenna and
the signal strength is low, adjust
the antenna or use a highly
directional outdoor antenna or
set-top antenna with a built-in
amplifier.
Make sure that the video cables
are connected securely to your
TV.
The video cable(s) you are using
may be bad. Try a new set.
Other devices (for example, a
surround sound receiver, external
speakers, fans, or hair dryers) may
be interfering with your TV. Try
turning off one device at a time to
determine which device is
causing interference. After you
have determined which device is
causing interference, move it
further from the TV to eliminate
the interference.
Double images.
•Use a highly directional outdoor
antenna, cable TV, or satellite TV.
The picture has a
few bright or dark
spots.
A few bright or dark spots on an
LCD screen is normal. It does not
affect the operation of your TV.
Good picture, but
no sound.
•Increase the volume.
Make sure that the sound is not
muted.
Make sure that the correct audio
mode is selected.
Make sure that the audio cables
are connected correctly and
securely to your TV.
Make sure that the antenna or
cable TV is connected correctly
and securely. See “Connecting a
cable or satellite box” on page 14
or “Connecting an antenna or
cable TV (no box)” on page 18.
If you are using an antenna, the
digital channel signal may be low.
To check the digital channel
signal strength, see “Checking
the digital signal strength” on
page 52.
The audio cable(s) you are using
may be bad. Try a new set.
Problem Solution

Table of Contents

Other manuals for Sharp LC-40LB480U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-40LB480U and is the answer not in the manual?

Sharp LC-40LB480U Specifications

General IconGeneral
BrandSharp
ModelLC-40LB480U
CategoryTV
LanguageEnglish

Related product manuals