EasyManua.ls Logo

Sharp LC 42D43U - 42" LCD TV

Sharp LC 42D43U - 42" LCD TV
61 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Basic adjustment settings
Channel memory setting
vo OH
FREEZE MENU
0 @
m FAVORITECH m
®®@@
SL_:EP AUDIO AV_0D_ CC
Press MENU to display the MENU screen, and
then press _11/1_to select "Setup".
Press &/Y to select "CH Setup", and then
press ENTER.
Ifyou already set the Secret No., input the 4-digit
secret number here. See page 41 for setting a
secret number.
Press &/V to select "CH Memory", and then
press ENTER.
Press &/T to select ANALOG (Air), ANALOG
(Cable), DIGITAL (Air) or DIGITAL (Cable), and
then press ENTER.
When viewing ANALOG broadcasts:
Press 4/1_ to select the channel to skip,
and then press 'IV to move down.
Press _1/1_ to select "On", and then press
ENTER.
When viewing DIGITAL broadcasts:
Press &/Y to select the channel to skip,
and then press _11/1_to select "On".
On: Skipschannels.(Channelselectiondisabled usingCH
A/V.)
off: Does not skip channels.(Channelselectionenabled
using OH A/V.)
Press MENU to exit.
Make sure what kind of connection is made with your TV.
In order to receive digital air broadcasts, you need
a digital broadcast antenna. You can confirm the
antenna configuration through the "Antenna Setup -
DIGITAL" screen.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
Signal Strength
PressMENUtodisp,aytheMENUscreen,and
.....: _ then press _/_ to select "Setup".
Press A/'V to select "Antenna Setup -
DIGITAL", and then press ENTER.
Press &/Y to select "Signal Strength".
- The signal strength of DIGITAL channel is
displayed. The signal information is based on the
current channel.
£ignalgtrength
Press MENU to exit.
Channel Strength
The channel signal strength can also be checked
separately.
Repeat steps 1 and 2 in Signal Strength in
Antenna Setup - DIGITAL,
PressA'"tose,ect"Channe,Strength",and
';111' then press ENTER.
Input the 2-digit channel number to check the
signal strength of the selected channel.
- Make sure the signalis strong enoughfor each
channel.
OhanneJStrength
Press MENU to exit.
Q- 24
This function is available for DIGITAL (Air) only.

Table of Contents

Related product manuals