QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUOS television for stability.
• Lift onto installation location as the diagram illustrates. ,
\
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near
water. The AQUOS television is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth (supplied) with water to lightly moisten. Gently _ _-_. r_.._fl._
wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method. Do _:_JY -t_
not use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted. \ _ _ _ /
QUICK iNSTALLATiON TiPS
Attach your antenna to the back of the AQUOS
television. (See page 13.)
Connect the AC plug for the AQUOS television
into the AC outlet.
How to turn on the AQUOS television for the
first time.
A) Press POWER on the AQUOS television.
v c_/,, INPUT
POWER
Placethe TV closeto the AC outlet, and keep the power
plug within reach.
B) The POWER indicator on the front of the
AQUOS television lights GREEN.
00oo
,_ TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-iNSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
Place the Ferrite core in the space indicated in
the below figure and bundle the cords properly
with cable clamps and a cable tie.
Ferrite core
POWER indicator
• Speakers cannot be detached from the TV.
• TV angle cannot be adjusted.
To Next Page
Loading...
Need help?
General