Sharp LC-46LE925E - REMOVING OF MAJOR PARTS (LC-46 LE925 E)

LC-46/60LE925E
4 – 1
LC-46LE925E
Service Manual
CHAPTER 4. REMOVING OF MAJOR PARTS
[1] REMOVING OF MAJOR PARTS (LC-46LE925E)
1. Removing of Stand Unit and Rear Cabinet Ass’y.
1. Remove the 1 lock screw and detach the Support Cover .
2. Remove the 4 lock screws and detach the Stand Unit .
3. Remove the 1 lock screw and detach the AC Cord Cover .
4. Disconnect AC wire and detach the AC Cord .
5. Remove the 4 lock screws , 4 lock screws , 1 lock screw and 16 lock screws and detach the Rear Cabinet Ass’y .
[AC]
[AC]
3
4
Stand Unit
6
1
2
Support Cover
AC Cord
Cover
5
9
8
7
10
11 Rear Cabinet Ass'y
12
AC Cord