EasyManuals Logo

Sharp LC-46LE925E User Manual

Sharp LC-46LE925E
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
LC-46/60LE925E
7 – 2
The sound is not emitted from the Speaker & Woofer though the picture has come out.
No sound output in all modes?
Is the signal output from pins (F30/AOLRCK), (F28/AOBCK)
(G28/AOSDATA0) of IC3302 (Digital AV decode & Main CPU)?
NO Check IC3302 and its peripheral circuits.
YES
Is the signal sent to pins (7), (8), (9) of IC2701 (DSP)? NO Check the line between IC3302 and IC2701.
YES
Is the signal output from pins (43/AMP_BCLK),
(44/AMP_LRCLK), (45/AMP_DATA_LR), (46/AMP_DATA_SW),
(47/AMP_MCLK) of IC2701?
NO Check IC2701 and its peripheral circuits.
YES
In the case that the sound is not emitted from the Speaker, refer
to (A)
In the case that the sound is not emitted from the Woofer, refer to
(B)
(B)
(A)
Is the signal sent to pins (5), (6), (7), (8) of IC2703
(SP_AMP)?
NO Check the line between IC2701 and IC2703.
YES
Is the audio signal output from pins (28/OUTML),
(30/OUTPL), (12/OUTPR), (14/OUTMR) of IC2703?
NO Check IC2703 and its peripheral circuits.
YES
Is pin (21) of IC2703 at H? NO Check the line between IC2703 and IC3302.
YES
Is the audio signal input to pins (1, 2/L-ch), (3, 4/R-ch) of
P2701?
NO P2701 terminal and the peripheral circuit (L/C filter) are checked.
YES
Check Speaker (right and left) and wire harness.
Is the signal sent to pins (5), (6), (7), (8) of IC2702
(Woofer_AMP)?
NO Check the line between IC2701 and IC2702.
YES
Is the audio signal output from pins (28/OUTML), (30/OUTPL),
(12/OUTPR), (14/OUTMR) of IC2702?
NO Check IC2702 and its peripheral circuits.
YES
Is pin (21) of IC2702 at H? NO Check the line between IC2702 and IC3302.
YES
Is the audio signal input to pins (1/SUB(+)), (2/SUB(-)) of P2702? NO P2702 terminal and the peripheral circuit (L/C filter) are checked.
YES
Check Woofer and wire harness.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp LC-46LE925E and is the answer not in the manual?

Sharp LC-46LE925E Specifications

General IconGeneral
Screen shapeFlat
Response time- ms
Display diagonal46 \
Display brightness- cd/m²
Native aspect ratio16:9
Native refresh rate100 Hz
LED backlighting typeEdge-LED
Viewing angle, horizontal176 °
RMS rated power20 W
Number of speakers2
PC in (D-Sub)-
HDMI ports quantity4
DVI-D ports quantity0
Common interface (CI)No
USB 2.0 ports quantity1
Common interface Plus (CI+)Yes
Consumer Electronics Control (CEC)Aquos Link
Product colorBlack
Panel mounting interface400 x 400 mm
Power consumption (standby)0.2 W
Power consumption (typical)95.1 W
Tuner typeAnalog & digital
Analog signal format systemNTSC, PAL, SECAM
Digital signal format systemDVB-C, DVB-S, DVB-S2, DVB-T
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)340 mm
Height (with stand)785 mm
Weight (with stand)45000 g
Depth (without stand)39 mm
Width (without stand)1127 mm
Height (without stand)734 mm

Related product manuals