Sharp LC-60LE822E User Manual

LC-60LE822E/LC-60LE822ERU
4 – 6
[2] Caution Cleaning Glass
1. Glass handling
CAUTION: (1) As for handling, wear clean gloves, protective footwear-
and mask.
(2) Inner gloves are covered in the Nitrile gloves.
(3) Nitrile gloves are exchanged with the following
standard.
• When it touched a face and so on.
• When another work was done.
• By the work of fifty times.
• In the time for recess.
• When it became dirty.
• When it tore.
(4)Have a designated place at the time of the handling.
Back side : Black print part
Front side : Protection tape part
You must not have a clear surface.
(5) Two people have handling equally by the work.
(Maintain it so that glass is not warped.)
(6) When it is put horizontally, it is put on the flat mat.
(7) A cushion material is put between glass.
It doesn't touch it [the front and the front].
It can be put to two glass.
(8) It has a module part before the CAB-B installation.
(It has a module part.)
mask
protective footwear
Inner gloves
Nitrile gloves
Inner gloves Nitrile gloves
changed to new Nitrile gloves
flat mat
glass
glass
glass
cushion material
flat mat
A module isn't added.
You must not have it.

Sharp LC-60LE822E Specifications

General

Power supply type	AC
Power consumption (standby)	0.20 W
Power consumption (typical)	100 W
Child lock	No
Plug and Play	Yes
Audio formats supported	AAC
Video formats supported	H.264, MPEG4
Display diagonal	60 \
Display technology	LCD
Native aspect ratio	16:9
Native refresh rate	100 Hz
Viewing angle, horizontal	176 °
Internal memory	8000 MB
Audio (L/R) in	0
HDMI ports quantity	4
SCART ports quantity	1
Product color	Black
LED indicators	Stand-by
Panel mounting interface	400 x 400 mm
Remote control type	GA841WJSA
RMS rated power	20 W
Number of speakers	2
Tuner type	Analog & digital
Analog signal format system	NTSC, PAL, SECAM

Weight and Dimensions

Depth (with stand)	368 mm
Width (with stand)	1439 mm
Height (with stand)	975 mm
Weight (with stand)	51000 g
Depth (without stand)	40 mm
Height (without stand)	913 mm