8-45
SYSTEM SETTINGS►SETTING MODE LIST
*1 When an internet fax expansion kit is installed
*2 When a facsimile expansion kit is installed
*3 This setting is configured in setting mode on the machine.
*4 This setting is configured in setting mode on the web page.
Energy Save
U: General user; A: System administrator/Administrator
• Send Settings No Yes
-Server Send Disabled No Yes
- Hostname or IP Address (Required) – No Yes
- Enable SSL Off No Yes
- Port Number 514 No Yes
- Port Number (Use SSL) 6514 No Yes
Save/Delete Audit Log No Yes
• Audit Log – No Yes
• Save Audit Log*
4
– No Yes
• Delete Audit Log – No Yes
Setup Items Factory default setting U A
● Energy Save (page 8-164)
X Eco Setting No Yes
Eco Recommendation Function Display Disabled No Yes
Display Message When Extending Transition Time to
Preheat/Auto Power Shut-Off Mode
Disabled
No Yes
Mode Setting Custom No Yes
Preheat Mode Setting 1min. No Yes
• Turn off Panel Display during pre-heat mode Enabled No Yes
Auto Power Shut-Off Enabled No Yes
As soon as the remote job is finished, enter Auto
power shut off mode.
Enabled
No Yes
Fix transition time. Enabled No Yes
• Auto Power Shut-Off Timer 15min. No Yes
Change transition time by time of day. Auto No Yes
Sleep Mode Power Level Low Power No Yes
X Eco Scan Setting No Yes
Eco Scan Setting Enabled No Yes
• Home Screen Disabled No Yes
• Copy Disabled No Yes
Image Send All Enabled No Yes
Document Filing All Enabled No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
