Sharp MX-6580N

8-46
SYSTEM SETTINGS►SETTING MODE LIST
System Control
U: General user; A: System administrator/Administrator
*1 This setting is configured in setting mode on the web page.
*2 This setting is configured in setting mode on the machine.
 System Settings Enabled No Yes
 Sharp OSA All Enabled No Yes
X Energy Saving Pattern List No Yes
 Automatic Update Pattern – No Yes
 Original Eco Pattern – No Yes
X Specific Date Operation Settings – No Yes
X Power ON/OFF Schedule Setting – No Yes
X Toner Save Mode All Invalid No Yes
Setup Items Factory default setting U A
● System Control (page 8-171)
X Job Log No Yes
 Job Log Operation – No Yes
• Job Log – No Yes
• Save Job Log*
1
No Yes
- The Number of Job Log to Notify by E-mail 50000 No Yes
• Delete Job Log – No Yes
 View Job Log – No Yes
X Data Import/Export (CSV Format) – No Yes
X Storage Backup – No Yes
X Device Cloning – No Yes
X Address Book Forward*
2
– No Yes
X Filing Data Backup*
1
– No Yes
X Storing/Calling of System Settings No Yes
 Store Current Configuration – No Yes
 Restore Configuration – No Yes
X Reset Settings No Yes
 Restore Factory Defaults – No Yes
 Reset the NIC – No Yes
X Optimization of a Hard Disk No Yes
 Optimization of a Hard Disk – No Yes
X E-mail Alert and Status No Yes
 Status Message – No Yes
 Alerts Message – No Yes
Setup Items Factory default setting U A