Menu item Description
Printer Emulations
Emulator Security
Reset Emulator After Job
O*
On
Reset the emulator after a print job.
Printer Emulations
Emulator Security
Disable Printer Message Access
O
On*
Disable access to printer message during emulation.
Print Configuration
Black Only Mode
O*
On
Print color content in grayscale.
Print Configuration
Color Trapping
O
1
2*
3
4
5
Enhance the printed output to compensate for misregistration
in the printer.
Print Configuration
Font Sharpening
0–150 (24*)
Set a text point-size value below which the high‑frequency
screens are used when printing font data.
For example, if the value is 24, then all fonts sized 24 points or
less use the high‑frequency screens.
Device Operations
Quiet Mode
O*
On
Set the printer to operate in Quiet Mode.
Note: Enabling this setting slows down the printer
performance.
Device Operations
Safe Mode
O
On*
Set the printer to operate in a special mode, in which it attempts
to continue oering as much functionality as possible, despite
known issues.
For example, when set to On, and the duplex motor is
nonfunctional, the printer performs one‑sided printing of the
documents even if the job is two‑sided printing.
Device Operations
Custom Supply Levels
O*
On
Let printservice read and edit values from the Embedded Web
Server.
Device Operations
Clear Custom Status
Erase user‑defined strings for the Default or Alternate custom
messages.
Note: An asterisk (*) next to a value indicates the factory default setting.
Understanding the printer menus 42
To Next Page
Loading...
