Sharp MX-M200D Software Setup Guide

25
SETUP IN A MACINTOSH ENVIRONMENT
2
14
Configure the printer driver.
The procedure for configuring the printer driver varies depending on the operating system version. The
procedure for versions 10.4.11 and 10.5 - 10.5.6 and the procedure for other versions are explained separately
below.
(1) Click the [Default Browser] icon.
If multiple AppleTalk zones are displayed,
select the zone that includes the printer from
the menu.
If you are using Mac OS X v10.5 to 10.5.6,
click the [Default] icon.
(2) Click the machine's model name.
The machine's model name usually appears
as [SCxxxxxx]. ("xxxxxx" is a sequence of
characters that varies depending on your
model.)
The PPD file of the machine is automatically
selected.
(3) Make sure that the PPD file of your model
is selected.
(4) Click the [Add] button.
The PPD file of the machine is automatically
selected and the peripheral devices installed
on the machine are detected and
automatically configured.
(1) Select [AppleTalk].
If multiple AppleTalk zones are displayed,
select the zone that includes the printer from
the menu.
(2) Click the machine's model name.
The machine's model name usually appears
as [SCxxxxxx]. ("xxxxxx" is a sequence of
characters that varies depending on your
model.)
(3) Select the PPD file of the machine.
If you are using Mac OS X v10.3.9, select
[Auto Select].
If you are using Mac OS X v10.2.8, select
[Sharp] and click the PPD file of your model.
(4) Click the [Add] button.
If you are using Mac OS X v10.3.9, the PPD
file of the machine is automatically selected
and the peripheral devices installed on the
machine are detected and automatically
configured.
v10.4.11, v10.5 - 10.5.6
(1)
(2)
(4)
(3)
v10.2.8, v10.3.9
(1)
(2)
(4)
(3)
The PPD file is installed in the following folders on the startup disk.
[Library] - [Printers] - [PPDs] - [Contents] - [Resources] - [en.lproj]
Note

Sharp MX-M200D Specifications

General

Brand	Sharp
Model	MX-M200D
Category	All in One Printer
Language	English