MX-M182 SIMULATIONS 7-36
46 13-16
19 Exposure mode setting ( table setting/AE operation mode setting/Photo image process setting)
Used to set the following three items. Select an item with the [ ] key or [ ] key and enter a set value with
numeric keys.
(1) : table setting
(2) : AE operation mode
(3) : PHOTO image process setting
When this simulation is executed, the current set code number of the above three modes are displayed.
(1) AE MODE( table setting)
Used to set the priority operation mode of the AE mode. When the image takes priority regardless of the
toner consumption, set to 1. When the toner consumption must be suppressed regardless of image quality,
set to 2.
* If this setting is changed, SIM 46-30 returns to the default.
Default:
2
(2) AE STOP (AE operation mode)
Used to set the area for automatic exposure correction in image process.
Default:
0
(3) PHOTO (PHOTO image process setting)
Used to set the image process when the PHOTO mode is selected. Selection is available in the following
two modes:
Default:
2
Main
code
Sub
code
Contents Remark
[OK] key[OK] key
[OK] key[OK] key
Sim46-15 ':2.'8'.
Sim46-15 ':2.'8'.
Sim46-15 ':2.'8'.
Sim46-15 ':2.'8'.
Sim46-15 ':2.'8'.
S-FINE
1:AE(PHOTO ON)
2:AE(PHOTO OFF)
(1㧙) X
S-FINE XX
AE PHOTO ON
(2DIGITS) YY
S-FINE YY
AE PHOTO ON
EXEC
S-FINE YY
AE PHOTO ON
SCAN EXEC
S-FINE YY
AE PHOTO ON
PRINT EXEC
Sim46-15 ':2.'8'.
S-FINE
3:MANUAL(PHOTO ON)
4:MANUAL(PHOTO OFF)
(1㧙) X
After input 1 - 4
After input 0 - 99
Sim46-16 ':2.'8'.
Sim46-16 ':2.'8'.
Sim46-16 ':2.'8'.
Sim46-16 ':2.'8'.
Sim46-16 ':2.'8'.
U-FINE
1:AE(PHOTO ON)
2:AE(PHOTO OFF)
(1㧙) X
U-FINE XX
AE PHOTO ON
(2DIGITS) YY
U-FINE YY
AE PHOTO ON
EXEC
U-FINE YY
AE PHOTO ON
SCAN EXEC
U-FINE YY
AE PHOTO ON
PRINT EXEC
Sim46-16 ':2.'8'.
U-FINE
3:MANUAL(PHOTO ON)
4:MANUAL(PHOTO OFF)
(1㧙) X
After input 1 - 4
After input 0 - 99
XX: Adjustment value of current state
YY: Inputted adjustment value
XX: Adjustment value of current state
YY: Inputted adjustment value
Sim46-19 AE MODE
1:AE MODE
2:AE STOP
3:PHOTO
[ 1- 2]
1
0
1
1
Code number table setting
1 Priority on image quality
2 Priority on toner consumption
Code number AE operation mode
0 Lead edge stop
1 Real time process (All areas)
Code number Image process mode
1 Error diffusion process
2 Dither process
To Next Page
Loading...
Need help?
General
Weight and Dimensions
