MX-M182 SIMULATIONS 7-37
46 20 SPF/RSPF exposure correction
Used to set the exposure correction amount in the SPF/RSPF mode. (Since a slightly darker image is
outputted in the SPF/RSPF mode compares to the OC mode, the difference from the OC mode is corrected
with this simulation. When, therefore, the exposure in the OC mode is corrected, the SPF/RSPF exposure is
also changed accordingly.)
Enter a correction value with numeric keys and press [OK] key. The adjustment value is saved in the
EEPROM and the machine shifts to the adjustment copy window. Since this simulation is used to make up
for the exposure difference from the OC mode regardless of the exposure mode, the adjustment is fixed to
TEXT mode and the exposure mode cannot be changed. After completion of copying for check, the machine
returns to the setting window.
The adjustment value is in the range of 1 - 99.
Adjustment value (Image change) 99 (Dark) • • • 50 (Default) • • • 1 (Light)
(Only when the
SPF/RSPF is
installed.)
Default:
50
29 Image contrast adjustment (600dpi)
Used to adjust the image contrast for each mode.
When this simulation is executed, the current set value of each mode is displayed in two digits. (Default: 50)
Select an adjustment item (mode) with the arrow keys and enter a desired value with numeric keys.
When [OK] key is pressed, the entered value is saved to the EEPROM and the machine shifts to the copy
execution window.
After completion of copying, the machine returns to the adjustment value input window.
When [START] key is pressed instead of [OK] key, the machine shifts to the copy execution window and
performs copying.
Default:
AE: 50
TEXT: 50
PHOTO1: 50
PHOTO2: 50
TEXT (TS): 50
AE (TS): 50
Main
code
Sub
code
Contents Remark
Sim46-20 SPF EXP.
1:SPF EXPOSURE
[ 1- 99]
50
50
Sim46-29 GAMMA SET Ready to copy.
1:AE
2:TEXT
3:PHOTO 1
1/2 [ 1-99]
50
50
50
50
S
100%
8 1/2×11
(Adjustment item selection window) (Copy start window)
Copies in progress.
S
100%
8 1/2×11
(Copy execution window)
Display text Copy mode
1:AE AE mode (600dpi)
2:TEXT TEXT mode (600dpi)
3:PHOTO 1 PHOTO mode (Error diffusion)
4:PHOTO 2 PHOTO mode (Dither)
5:TEXT (TS) TONER SAVE mode (TEXT)(600dpi)
6:AE (TS) TONER SAVE mode (AE)(600dpi)
Adjustment
item selection
window
Copy start
window
Copy execution
window
[BACK] key
[START] key
[START] key
End of copy execution
[OK] key
To Next Page
Loading...
Need help?
General
Weight and Dimensions
