Sharp MX-M310 - 2. Maintenance Parts List

MX-M260/M310/M260N/M310N CONSUMABLE PARTS 3 - 2
2. Maintenance parts list
A. SIICA/ SECL/ LAG (MX-M260/M310)
∗ The other maintenance parts than the above are supplied as service parts.
B. SEGA/ SUK/ SCA/ SCNZ/ SEA/ SEES/ SEZ/ SEIS/ SEB/ SEN/ SEF/ SMEF/ Russia/ Special country
(MX-M260/M310)
∗ The other maintenance parts than the above are supplied as service parts.
No. Item Content Life
Model
name
Remarks
1 Upper heat roller kit Upper heat roller
Fuser gear
Upper heat roller bearing
Upper cleaning pad
Fusing separation pawl (upper)
Thermistor cleaning pad
×1
×1
×2
×1
×4
×2
150K AR-310UH
2 Lower heat roller kit Lower heat roller
Fusing separation pawl (lower)
Fuser bearing (lower)
×1
×4
×2
300K MX-311LH
3 150K maintenance
kit
Drum separation pawl unit
Transfer roller unit
DV blabe
DV side sheet F
DV side sheet R
Toner filter unit
×2
×1
×1
×1
×1
×1
150K MX-311KA
4 MC unit MC unit ×10 26cpm: 75K (×10)
31cpm: 100K (×10)
MX-311MC
5 Cleaner blade Cleaner blade ×10 26cpm: 75K (×10)
31cpm: 100K (×10)
MX-311CB
6 Drum frame unit Drum frame unit ×1 26cpm: 225K
31cpm: 300K
MX-311DU
∗ The life of the toner reception seat attached to
the drum frame is 300K, and it can be used up
to 3 times. (Supplied as a drum frame unit.)
7 Transfer roller unit Transfer roller unit ×1 150K MX-311TX
8 Paper feed roller kit Paper feed roller kit ×1 100K MX-311RT
9 Fusing unit Fusing unit (120V heater lamp) ×1 150K MX-311FU
10 Staple cartridge Staple cartridge ×3 5000 staples ×3 MX-SCX1
No. Item Content Life
Model
name
Remarks
1 Upper heat roller kit Upper heat roller
Fuser gear
Upper heat roller bearing
Upper cleaning pad
Fusing separation pawl (upper)
Thermistor cleaning pad
×1
×1
×2
×1
×4
×2
150K AR-310UH
2 Lower heat roller kit Lower heat roller
Fusing separation pawl (lower)
Fuser bearing (lower)
×1
×4
×2
300K MX-311LH
3 150K PM kit Drum separation pawl unit
Transfer roller unit
DV blade
DV side sheet F
DV side sheet R
Toner filter unit
×2
×1
×1
×1
×1
×1
150K MX-311KA
4 MC unit MC unit ×10 26cpm: 75K (×10)
31cpm: 100K (×10)
MX-311MC
5 Cleaner blade Cleaner blade ×10 26cpm: 75K (×10)
31cpm: 100K (×10)
MX-311CB
6 Drum frame unit Drum frame unit ×1 26cpm: 225K
31cpm: 300K
MX-311DU
∗ The life of the toner reception seat attached to
the drum frame is 300K, and it can be used up
to 3 times. (Supplied as a drum frame unit.)
7 Transfer roller unit Transfer roller unit ×1 150K MX-311TX
8 Staple cartridge Staple cartridge ×3 5000 staples ×3 MX-SCX1