Sharp MX-M503N - Cleaning the Bypass Feed Roller; Cleaning the Original Feed Roller

1-62
BEFORE USING THE MACHINE
Contents
CLEANING THE BYPASS FEED ROLLER
If paper misfeeds frequently occur when feeding envelopes or heavy paper through the bypass tray, wipe the surface of
the feed roller with a clean soft cloth moistened with water or a neutral detergent.
CLEANING THE ORIGINAL FEED ROLLER
If lines or other dirt appear on the scanned original when the automatic document feeder is used, wipe the surface of the
roller with a clean soft cloth moistened with water or a neutral detergent.
Downloaded From ManualsPrinter.com Manuals