EasyManuals Logo

Sharp MX-M503N User Manual

Sharp MX-M503N
884 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #753 background imageLoading...
Page #753 background image
7-105
SYSTEM SETTINGS
Contents
Image Send Settings
Settings related to the image send function (scan, Internet fax, etc.) can be configured. Touch the [Image Send Settings]
key to configure the settings.
Fax Settings
The fax settings can be enabled or disabled to suit the
needs of your workplace.
Dial Mode Setting
Select the appropriate setting for your telephone line
type.
Dial Mode Setting
Select the line type from the list.
Auto Select
Select this after the line has been connected to have the
machine automatically detect whether your line is a
pulse dial line or a tone dial line.
Auto Wake Up Print
When the [POWER] key ( ) is "off" (but the main
power switch is "on") and a fax is received, this function
automatically activates the machine and prints the fax.
When this function is disabled, received faxes are not
printed until the [POWER] key ( ) is switched "on".
Pause Time Setting
Use this to change the length of pauses inserted in fax
numbers.
If a hyphen "-" is entered when dialing or storing a fax
number, a pause of 2 seconds is inserted.
The pause can be changed to any number of seconds
from 1 to 15.
Fax Dest. Confirmation Mode
This setting specifies whether or not a destination
verification message is displayed when sending a fax in
order to prevent accidental transmission to the wrong
destination.
Speaker Settings
Use these settings to set the sound heard from the
speaker for the Speaker, Ringer Volume, Line Monitor,
Fax Receive Complete Signal, Fax Send Complete
Signal, and Fax Communication Error Signal. For the
Fax Receive Complete Signal, the Fax Send Complete
Signal, and the Fax Communication Error Signal, the
Tone Pattern and Transmission Complete Sound Time
Setting can be selected in addition to the volume.
Check on Setup Sounds
Use this to check the selected tone pattern and volume.
Remote Reception Number Setting
Fax reception can be activated from an extension phone
connected to the machine by entering a 1-digit number
and pressing the key twice on the phone's keypad.
This number is called the remote reception number, and
you can set it to any number from "0" to "9".
Fax Default Settings

Table of Contents

Other manuals for Sharp MX-M503N

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MX-M503N and is the answer not in the manual?

Sharp MX-M503N Specifications

General IconGeneral
Print TechnologyLaser
Print Speed50 ppm
Maximum Print Resolution1200 x 1200 dpi
Scan TypeColor Scanner
Standard Paper Capacity1, 100 sheets
Maximum Paper Capacity5, 600 sheets
Duplex PrintingYes
Network ConnectivityEthernet
FunctionsPrint, Copy, Scan, Fax
Original SizeA3
Warm-up Time20 seconds
Copy Speed50 cpm
Scan Resolution600 x 600 dpi
Maximum Paper SizeA3
First Copy Time3.9 seconds

Related product manuals