Sharp MX-M503N User Manual

4-128
FACSIMILE
Contents
• Completed job
Message Status
"Send OK" Transmission completed.
"In Memory" Reception completed but the fax
has not been printed.
"Received" Printed received fax data.
"Forward OK" The received fax has been
forwarded.
"Stopped" The job was stopped.
"Delete" Deleted received data in the image
check screen.
"Number of
successful
transmission
destinations /
Total
destinations
OK"
Completion of a broadcast
transmission, serial polling or
inbound routing operation.
If transmission to 3 destinations
was successful out of a total of 5,
"003/005" will appear.
"No
response"
An error occurred because there
was no response from the
destination.
"Busy" An error occurred because the
other party was busy.
"Reject
Reception"
A fax was sent from a party that
has been blocked by the anti junk
fax function.
"NGxxxxxx" Transmission/reception was not
successful because a
communication error occurred (a
6-digit error code appears in
xxxxxx.)
"Error" An error occurred while the job was
being executed.

Sharp MX-M503N Specifications

General

Print Technology	Laser
Print Speed	50 ppm
Maximum Print Resolution	1200 x 1200 dpi
Scan Type	Color Scanner
Standard Paper Capacity	1, 100 sheets
Maximum Paper Capacity	5, 600 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Original Size	A3
Warm-up Time	20 seconds
Copy Speed	50 cpm
Scan Resolution	600 x 600 dpi
Maximum Paper Size	A3
First Copy Time	3.9 seconds