Sharp MX-M503N - System Settings for Fax (Administrator) List

7-103
SYSTEM SETTINGS
Contents
System Settings for Fax (Administrator) List
When the system settings for fax are accessed with administrator rights, the following items appear. For information on
the general settings, see "System Settings for Fax (General) List" (page 7-97).
Image Send Settings
• For the procedure for using the system settings (administrator), see "Accessing the System Settings (Administrator)" (page
7-26).
• Depending on the machine specifications and peripheral devices installed, it may not be possible to use some settings.
Item Factory default setting Page
■ Image Send Settings
7-105
● Fax Settings 7-105
X Fax Default Settings 7-105
 Dial Mode Setting* Tone 7-105
 Auto Wake Up Print Enabled 7-105
 Pause Time Setting Varies depending on country and region 7-105
 Fax Dest. Confirmation Mode Disabled 7-105
 Speaker Settings
7-105
• Speaker Volume: 5
• Ringer Volume Volume: 5
• Line Monitor Volume: 5
• Fax Receive Complete Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
• Fax Send Complete Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 3 sec.
• Fax Communication Error Signal Volume: 5; Tone Pattern: 3
Transmission Complete Sound Time
Setting: 0.3 sec. each
 Remote Reception Number Setting 5 7-105
 Original Print on Transaction Report Print Out Error Report Only 7-106
Downloaded From ManualsPrinter.com Manuals