Sharp MX-M503N User Manual

2-57
COPIER
Contents
3
Set the number of copies (number of
sets) with the numeric keys.
Up to 999 copies (sets) can be set. When the [START] key is
pressed, the copies will automatically be divided between the
master and slave machines.
If an odd number of copies is set, the master machine will print
the extra set.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
4
Press the [START] key.
Copying will begin.
If you are using the document glass, change originals and press the [START] key. Repeat until all pages have been scanned
and then touch the [Read-End] key.
The following screen appears when the [START] key is pressed.
After the message appears, tandem copying begins.
If tandem copying is not possible, the following screen appears.
To have the master machine make all copies, touch the [OK] key. To cancel the job, touch the [Cancel] key.
• To cancel scanning...
Press the [STOP] key ( ).
• To cancel tandem copying...
Touch the [STOP] keys ( ) on both the master machine and the slave machine.
Starting tandem operation.
Please wait.
Tandem output is not allowed.
Output all sets using master machine?
(Cancel will delete the job.)
Cancel
OK

Sharp MX-M503N Specifications

General

Print Technology	Laser
Print Speed	50 ppm
Maximum Print Resolution	1200 x 1200 dpi
Scan Type	Color Scanner
Standard Paper Capacity	1, 100 sheets
Maximum Paper Capacity	5, 600 sheets
Duplex Printing	Yes
Network Connectivity	Ethernet
Functions	Print, Copy, Scan, Fax
Original Size	A3
Warm-up Time	20 seconds
Copy Speed	50 cpm
Scan Resolution	600 x 600 dpi
Maximum Paper Size	A3
First Copy Time	3.9 seconds