Sharp PG-D4010X Setup Manual

-16
Confi rming the Projector
Status
(Status)
On this screen, you can confi rm the
projector status. You can confi rm the
following items:
MAC Address
Power
Condition
Lamp Timer
Lamp Life
Input
Signal Info
Serial Number
If you click the “Refresh” button before the
screen is displayed completely, an error
message (“Server Busy Error”) will be
displayed. Wait for a moment and then operate
again.
For details about each item, refer to the
projector's operation manual.
•
•
Note
•
•
•
•
•
•
•
•
Controlling the Projector via LAN
Controlling the Projector
(Control)
On this screen, you can perform projector
control. You can control the following
items:
Power
Input Select
Volume
AV Mute
If you click the “Refresh” button before the
screen is displayed completely, an error
message (“Server Busy Error”) will be
displayed. Wait for a moment and then operate
again.
You cannot operate this page while the
projector is warming up.
While the projector is in standby mode, you can
only control “Power ON”.
For details about each item, refer to the
projector's operation manual.
•
•
•
•
Note
•
•
•
•

Sharp PG-D4010X Specifications

General

Brand	Sharp
Model	PG-D4010X
Category	Projector
Language	English