Sharp PG-D4010X Setup Manual

-31
5
Click “Properties” on the “File”
menu.
6
Click the “Settings” tab, and then
click “ASCII Setup”.
7
Select the check boxes next to
“Send line ends with line feeds”,
“Echo typed characters locally”,
and “Append line feeds to
incoming line ends”, and click
“OK”.
The LAMPRESET Properties window
appears, click “OK”.
8
If a user name and/or password is
set for the projector, enter the
user name and password.
9
Send the lamp reset command
“LPRE0001”.
This command can only be sent when the
projector is in standby mode.
When “OK” is received, this indicates that the
lamp was successfully reset.
10
Close HyperTerminal.
•
•
•
5
6
7
8
9
1
0
Resetting the Lamp Timer of the Projector via LAN

Sharp PG-D4010X Specifications

General

Brand	Sharp
Model	PG-D4010X
Category	Projector
Language	English