Sharp PN-L803C Service Manual

PN-L803C/80TC3 SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES 4- 55
24-4. CHANGE THE COMMUNICATION CHANNEL OF THE TOUCH PEN ADAPTOR
1) Double-click the short-cut icon created in procedure 25-3.
Click the icon of the Touch Pen Utility on the task bar and select the Touch pen settings. Then, select the Pen adaptor settings.
2) The following Pen adaptor settings window is displayed. From the Channel settongs, select the channel to be set and click the [Apply
settings].
-> Referto the [Channel settings].
The confirmation message is displayed. Click the [OK].
Then, click the [Close].

Sharp PN-L803C Specifications

General

Brand	Sharp
Model	PN-L803C
Category	Monitor
Language	English