PN-L803C/80TC3 INSTALLATION, ADJUSTMENT, SETTING, OPERATION 2 - 37
■Calibration
Calibration is used to perform position alignment so that the mouse cursor moves to the correct position when the screen is touched.
Adjust
Calibration can be performed manually. Click “OK” to open the settings. Follow the on-screen instructions.
Reset
The calibration settings will be deleted.
■
Properties
Settings for the touch action can be configured.
Item Contents
Double Click Range
Setting (Mouse Mode)
Set how much the position can shift between the first touch and the second touch and still be
recognized as a double-click.
To return the setting to the default setting, click “Default”.
(MEMO)
- Changing this setting also changes the effective double-click range when the mouse is used.
Double Click Speed Setting
(Mouse Mode)
Set the time that is recognized as a double-click. When a second touch occurs within the set
time after the first touch, it is recognized as a double-click.
Speed Setting (Auto) The inside of the frame can be touched twice (double-clicked) to set the speed automatically
based on the interval between the touches.
Set Manually The speed can be set manually from “Slow” (about 1 second) to “Fast” (about 0.3 seconds).
Test When the inside of the frame is double-clicked by touching it twice, the screen changes. If the
screen does not change, repeat the setting.
Default Click to restore the default setting.
(MEMO)
- Changing this setting also changes the mouse double-click speed of Windows.
- Depending on the application software, changing the setting may not have any effect (for example, if the setting is set separately in the
application).
To Next Page
Loading...
Need help?
General
