No Procedure on P.C. side No Procedure on UP-600 side
11 Execute the "02FD.EXE" on the P.C.
*Please close all other applications while using this utility.
12 Set the Communication method by pushing the "Setting" Button.
Push The "OK" Button.
13 Push the "Transmit Start" Button.
And Select the Sending File.
14 Communication starts. 14 The UP-600 displays
15 The DownLoad is completed.
The initial Window is shown.
Push the "Exit" Button.
15 The DownLoad is completed.
The SETTING menu is shown.
16 Execute the " Service Reset " on the UP-600
3. NOTE FOR HANDLING OF LCD
• The LCD elements are made of glass. Use extreme care when
handling the LCD.
Any strong shock applied to the LCD can cause damage.
• If the LCD element is broken and the liquid has leaked, do not
come in contact with it. If the liquid is attached to your skin or cloth,
immediately clean with soap.
• Use the unit under the rated conditions to prevent against damage.
• Be careful not to drop water or other liquids on the display surface.
• The reflection plate and the polarizing plate are easily scratched.
Be careful not to touch them with hard objects such as glass,
tweezers, etc. Never hit, push, or rub the surface with hard objects.
• When installing the unit, be careful not to apply stress to the LCD
module. If excessive stress is applied, abnormal display or uneven
color may result.
RECEIVING 00000
To Next Page
Loading...
