Sharp UX-300

<P=003>
9
Press the
START/MEMORY
key to start the clock.
START/MEMORY
FUNCTION
3
The display will show:
DAY LIGHT SAVING
10
Press the
STOP
key to return to the date and time display.
STOP
Daylight Saving Time
If desired, you can have the clock move forward and backward
automatically at the beginning and end of Daylight Saving Time. To
turn on this function, press the panel keys as follows:
1
Press these keys:
The display will show:
ENTRY MODE
2
Press the
*
key three times.
The display will show:
DAY LIGHT SAVING
3
Press
1
to turn on the Daylight Saving Time function, or
2
to turn it
off.
The display will show:
1
2
YES
NO
or
STORE JUNK #
4
Press the
STOP
key to return to the date and time display.
STOP
1. Installation
Setting the Date and Time
29