UX300U-OSOS
RT
<P=001>
Chapter
8
Option
Settings
The option settings let you customize your fax to better suit your needs.
An initial setting has been made for each option at the factory. You can
change a setting by following the steps described for each option below.
First press
FUNCTION
and
4
, then press
#
or
*
to scroll through the
options.
or
Setting 1: FINE RESOLUTION PRIORITY
This option sets the default resolution (the resolution used if a setting is
not made with the RESOLUTION key) for transmitting documents.
Press 1 (YES) to set the default resolution to FINE, or 2 (NO) to set it to
STANDARD.
• Initial setting: 2
FUNCTION
4
FUNCTION
4
Display
will show:
FINE PRIORITY
STOP
2
1
YES
NO
or
NUMBER OF RINGS
88
To Next Page
Loading...
