<P=002>
♦
If Option Setting 17 (Auto Print Out) is set to YES, a report will
be automatically printed out whenever information on 30
operations has accumulated. (A report can still be printed on
demand at any time.)
♦ All information is erased after a report is printed out. If automatic
print-out is turned off and print-out has not been done manually
for 30 operations, the information on the oldest operation will be
overwritten each time a new operation is performed.
Explanation of headings
SENDER/
RECEIVER
The fax number of the other machine involved in the transaction. If
this machine does not have an ID function, the communication mode
will appear (for example, "G3").
PAGES
Number of pages transmitted or received.
NOTE
OK
- Transmission/reception was normal.
P.FAIL
- A power failure occurred. If you have power and the
problem persists, try a different outlet. If necessary, have an
electrician check your power lines.
JAM
- A problem with the paper or original document occurred.
Make sure the paper or document is loaded properly. Make sure the
operation panel is shut securely.
NO PAPER
- You ran out of paper during reception.
9. Printing Lists
Printing Reports and Lists
97
To Next Page
Loading...
Need help?
General
