Option Settings
47
7. Option/Print
Settings
FAX SIGNAL
RX
The machine will automatically begin reception if you hear a soft
fax tone after answering a call on the machine’s handset or an
extension phone. If you use a computer fax modem to send
documents on the same line, you must turn this function off in
order to prevent the machine from mistakenly attempting to
receive documents from the computer fax modem. Press
(YES) to turn on the the automatic reception function, or
(NO) to turn off the function. If you select NO, you must start
reception manually by pressing on the machine each time
you hear a soft fax tone after answering a call.
Initial setting: YES
CALLER-ID If you subscribe to a Caller ID service from your phone company,
use this setting to have the ID of the caller appear in the display
each time you receive a call. For more information, see page 37.
Initial setting: NO
AUTO PRINT
OUT
Press (YES) to have the machine automatically print an
Activity Report once every 30 send/receive operations. (The
report can still be printed manually at any time.) Press (NO)
to turn off Auto Print Out.
Initial setting: NO
ECM MODE
Press (YES) to have any distortions in a transmission due to
noise on the telephone line automatically corrected before print-
out at the receiving end. This is only effective when the other
machine has ECM as well. Press (NO) to turn off ECM
mode. (When there is considerable noise on the line, you may find
that ECM slows transmission. Turning off ECM mode may
increase transmission speed.)
Initial setting: YES
DAY LIGHT
SAVING
To have the machine’s clock automatically move forward and
backward at the beginning and end of daylight saving time, press
(YES). To turn off this feature, press (NO).
Initial setting: NO
To Next Page
Loading...
Need help?
General
