Sharp XE-A137 - Reading Stored Programs; Key Sequences for Reading Programs

64
■
Automatic EURO modication operation settings
@ s A
AB
To set “00”
s
12
To program another job code
Item: Selection: Entry:
A
Converting the preset unit price of Dept./PLU in the
automatic modification operation for EURO (job #800
in the Z/PGM mode)
Yes* 0
No 1
B
Automatic modification operation for EURO (job #800
in the Z/PGM mode) at the preset date
Compulsory* 0
Non-compulsory 1
Example
Key operation Print
s
12
@
01
s
A
NOTE
 IfyouhavealreadymadetheJob#800operationwiththesubstitutionof3for“A”intheZ/PGMmode,
thisprogrammingisdisabled.
■
Date setting for EURO modication operation
s A
Date (DD-MM-YY)
(5 or 6 digits)
To set all zeros
@
s
13
To program another job code
Example
Key operation Print
s
13
@
010113
s
A
NOTE
 •Incaseyouchangedthedateformatusingjobcode61,followtheformatyouselectedforsettingthe
date.
 •Ifallzerosareset,thisprogrammingisdisabled.
 •IfyouhavealreadymadetheJob#800operationwiththesubstitutionof3for“A”intheZ/PGMmode,
thisprogrammingisdisabled.