Sharp XE-A217W - Date;Time Setting; Date;Time

86
Date/TimeSetting
You can set the date and time for the register.

■
Date/time
Procedure
1.
In the SETTING window, select “7 DATE/TIME”.
• The DATE/TIME window will appear.
2.
Set each item as follows:
•DATE(Usethenumericentry)
Enter the day (2 digits), month (2 digits), and year (2
digits) in this sequence.
•TIME(Usethenumericentry)
Set the time (max. 4 digits) on the 24-hour system. For
example, when the time is set to 2:30 AM, enter 0230;
and when it is set to 2:30 PM, enter 1430. The time will be
printed and displayed. Once you set the time, the internal
clock unit will continue to run as long as the built-in battery
pack is charged and also update the date (day, month,
year) properly.