36
Function selection
*: Item: Selection: Entry:
A Commission group number 0-2 (0: Non commission) (default: 0)
B PLU/subdepartment selection Subdepartment 0
PLU* 1
When you program the last PLU code, the programming sequence will be complete with a press of
the
s
key.
Based on each clerk’s sales total of each commission group and the corresponding commission rate, the
commission amounts are calculated, and printed on clerk reports.
Commission rate
You must use a decimal point when setting a fractional rate.
s
28
@
1
@
15
sA
PrintKey operation example
s
Commission
number (1 or 2)
@@ sA
Commission rate
(0.00 - 999.99)
28
Commission Rate Programming
3
PLU/subdept. selection
Commission group
¡
10
sA
PrintKey operation example
To program “00”
To program the following PLU
To program another PLU
As
AB
*
PLU code
(1-1800)
p
Direct PLU key
To Next Page
Loading...
