Sharp XE-A302

57
Training clerk specification for training mode
For the details of clerk training, please refer to “TRAINING MODE” on page 59.
AUTO key programming — Automatic sequence key
If you program frequently performed transactions or report sequences for the
a
key, you can recall those
transactions and/or reports simply by pressing the
a
key in key operations.
Programming for
a
; entering a PLU 2 item (programmed unit price: 1.50) and a dept. 6 item (unit price: 1.00)
When the
a
key has been programmed to execute a report job function, the mode switch must be
in the appropriate position (OPX/Z for individual clerk reports, X1/Z1 for daily reports or X2/Z2 for
weekly or monthly reports).
a
™
100
(
a
A
AUTO
setting
PrintKey operation example
a
A
a
Transaction
(key entry)
Delete
max. 25 times
s
86
@
20
sA
PrintKey operation example
s @
Clerk code
(1 to 40)
As
To cancel
86
The machine allows you to read every program stored in the PGM mode.
Key sequence for reading stored program
• To stop reading programming report 1 or PLU programming report, turn the mode switch to the
MGR position.
• When printing is performed continuously, the printing may be intermitted several seconds. After
the intermission, the printing will be restarted.
Report name Key sequence
Programming report 1
A
Programming report 2 2 A
Auto key programming report 1 A
Printer density programming report 3 A
PLU programming report Start PLU code @ End PLU code p
Reading Stored Programs
4