Sharp XE-A302

61
• When both sales quantities and sales amounts are zero, printing is skipped. If you do not want to
skip, change the programming. (Refer to “Print format” of “Various Function Selection
Programming 1”.)
• “X” represents read symbol and “Z” represents reset symbol in the reports.
• To stop reading and resetting the PLU sales report, turn the mode switch to the MGR position.
The data will not be erased when you reset.
• When printing is performed continuously, the printing may be intermitted several seconds. After
the intermission, the printing will be restarted.
Item
Mode switch position
Key operation
OPX/Z X1/Z1 X2/Z2
X2, Z2
X2, Z2
Total in drawer
report
X1
X1 X2
A
Reading:
--
--
--
--
--
X, Z
Full clerk report
Hourly report
(full)
X1, Z1
X1, Z1
--
--
--
--
--
Individual clerk
report
P
LL
Reading: Resetting:
P
LL
Reading: Resetting:
P
ss
Reading: Resetting:
Hourly report
(by range)
s@
Reading: Start time End time
Daily net sales
report
P
ss
Reading: Resetting:
(The report of the current clerk)
(hour) (hour)
2