Sharp XG-PH70X - Removing the PWB Units

XG-PH70X/XG-PH70X-N (1st. Edition)
2 – 7
[9] Removing the PWB Units
1. Disconnect all the connector from the Main Unit.
2. Remove the five screws from the Main Unit. Detach the Main Unit from the PC I/F Unit.
3. Remove the two spacers from the PC I/F Unit.
4. Remove the five spacers and the screw.
5. Disconnect the PC I/F Unit from the Terminal Unit and then detach the PC I/F Unit.
FC7
RC
FC4
FC6
LSR
LSL
AD
9-5
FC7
RC
FC4
FC6
LSR
LSL
TS
FC5
FC2
FC3
CW
LSF
PR
BTL
BTR
TS
RC
FC1
FR
LSUD
LSRL
9-2
9-4
9-3
Main Unit
IR (Rear) Unit
PC I/F Unit
Terminal Unit
[Enlarged]
CW
PR
BTL
BTR
TS
RC
FC1
TS
FC5
FC2
FC3
LSF
FR
LSUD
LSRL