Sharp XL-HP888V - Tape Playback; Listening to a Cassette Tape

04/5/17 XL-HP888V(Z)E4.fm
E-33
ENGLISH
TINSZA075AWZZ
XL-HP888V
Tape Playback
Listening to a cassette tape
" Tape playback
Before playback:
!
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not rec-
ommended.)
!
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
!
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette door by push-
ing the area marked " PUSH
EJECT".
4
Load a cassette into the cas-
sette compartment with side A
facing you.
5
Press the button to choose one side or both
sides.
... To listen to both sides.
To play both sides ( ), start from side A. When playback starts
from side B, side A will not be played.
... For endless repeat play of both sides.
... To listen to one side.
6
Press the / ( ) button to listen to side A, or the ( )
button for side B.
Forward play
Reverse play
2
SHARP TINSZA075AWZZ (Z)