Sharp XL-HP888V - Enhancing Your System

04/5/17 XL-HP888V(Z)E4.fm
E-44
ENGLISH
TINSZA075AWZZ
4
XL-HP888V
Advanced Features
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
Auto power on function:
When you press any of the following buttons, the unit turns on.
!
VIDEO/AUX button (main unit and remote control): The unit turns
on and the "VIDEO" function is activated.
!
/ button on the main unit: The unit turns on and playback of
the last function starts (CD/VIDEO CD, TAPE, TUNER, VIDEO).
" Listening to the playback sounds from VCR,
DVD, etc.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
" To record on a tape
" Headphones
!
Before plugging in or unplugging the headphones, reduce the
volume.
!
Be sure your headphones have a 3.5 mm (1/8") diameter plug
and impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
!
Plugging in the headphones disconnects the speakers automati-
cally. Adjust the volume using the VOLUME control.
Red White
VCR, DVD, etc.
To the line
output sockets
RCA lead
(not supplied)
Red
White
1
Use a connection lead to connect the VCR, DVD, etc. to the
VIDEO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the VIDEO/AUX button.
4
Play the connected equipment.
1
Insert a cassette in the cassette compartment.
2
Press the VIDEO/AUX button.
3
Press the button.
4
Press the / ( ) or ( ) button.
5
Play the VCR, DVD, etc.