E-21
ENGLISH
XL-UR5H
USB/SD Memory Playback
To remove USB memory device
Notes:
z SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
z Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
z This USB memory’s format support FAT 16 or FAT 32.
z SHARP cannot guarantee that all USB memory devices will work
on this audio system.
z USB cable are not recommended for use in this audio system as
connection to USB memory device. Use of the USB cable will
affect the performance of this audio system.
z This USB memory cannot be operated via USB hub.
z If “NO SONG” is displayed, it means “Copyright protected WMA
file” or “Not supported playback file” is selected.
z The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
z The larger the capacity of the USB storage device, the longer it will
take for the data to be read.
z Some USB multi-reader devices may not work correctly with the
USB terminal on this unit.
z External storage devices cannot be played back using the USB
terminal on this unit.
Listening to SD mass storage
device / MP3 player
Note:
This product is not compatible with MTP and AAC file systems.
1 Press the STOP button on the remote control or button
on the main unit.
2 Disconnect USB memory device from the USB terminal.
1 Press the USB/SD / button, and push up the USB door.
Connect the SD memory device that has MP3/WMA format
files on the unit.
z To select USB or SD function, press and hold the USB/SD /
button for more than 2 seconds.
When the SD memory is connected to the main unit, the device
information will be displayed.
z In case in folder mode, proceed to step 2.
z In case track is selected, proceed to step 3.
Total number of folders
Total number of tracks
WMA MP3
USB
USB indicator SD indicator
To Next Page
Loading...
Need help?
General
