E-32
ENGLISH
8
XL-UR5H
Advanced Features
Note for RDS operation
If any of the following events occur, it does not mean that the
unit is faulty:
z “PS”, “NO PS” and a station name appear alternately, and the unit
does not operate properly.
z If a particular station is not broadcasting properly or a station is
conducting tests, the RDS reception function may not work
properly.
z When you receive an RDS station whose signal is too weak,
information like the station name may not be displayed.
z “NO PS”, “NO PTY” or “NO RT” will flash for about 5 seconds, and
then the frequency will be displayed.
Notes for radio text:
z The first 7 characters of the radio text will appear for 4 seconds
and then they will scroll across the display.
z If you tune in to an RDS station which is not broadcasting any
radio text, “NO RT” will be displayed when you switch to the radio
text position.
z Whilst radio text data is received or when the text contents
change, “RT” will be displayed.
To show Radio Data System signals on display
Select an FM station with Radio Data System signals.
1 Press the TUNER (BAND) button to select the FM.
2 Press the RDS DISPLAY button on the remote control.
z The display will switch as follows:
z PS (Programme Service):
Whilst searching, “PS” alternately appear on the display.
Then, the station name appears. “NO PS” appears if no signal is
sent.
z PT (Programme Type):
Whilst searching, “PTY” alternately appear on the display.
Then, the broadcast programme type appears. “NO PTY” appears
if no signal is sent.
z RT (Radio Text):
Whilst searching, “RT” alternately appear on the display.
Then, the next message sent by the station appears. “NO RT”
appears if no signal is sent.
z Station Frequency:
The frequency of the selected station appears on the display.
PS PTY RT
Station Frequency
To Next Page
Loading...
Need help?
General
