41
Basic Operation
Selecting the Economy Mode
(GUI) On-screen Display
These functions allow you to reduce the power
consumption when the projector is in stand-by mode.
RS-232C Off Function
This projector consumes power when using a computer
connected to the RS-232C port. When not using this
port, “RS-232C Port” can be set to “ ” for reducing
stand-by power consumption.
Description of RS-232C Off
1 Press MENU.
2 Press / to select “Options”.
3 Press
/ to select “RS-232C Port”.
4 Press
/ to select “ ” or “ ”.
5 To exit the GUI, press MENU.
• Set “RS-232C Port” to “ ” when using the SharpVision
Manager (supplied).
1,5
2,3,4
On-screen Display
(GUI) On-screen Display
Automatic Power Shut-off Function
When no input signal is detected for more than 15
minutes, the projector will automatically shut off. The
on-screen message on the left will appear five minutes
before the power is automatically turned off.
Description of Automatic Power Shut-off
1 Press MENU.
2 Press / to select “Options”.
3 Press / to select “Auto Power Off”.
4 Press / to select “ ” or “ ”.
5 To exit the GUI, press MENU.
•“RS-232C Port” is factory preset to “ ”, and “Auto Power
Off” is factory preset to “ ”.
Power automatically shuts off after 15 minutes without
an input signal.
Automatic Power Shut-off disabled.
Stand-by power for RS-232C connection turned off.
RS-232C on
To Next Page
Loading...
