Sharp ZQ-5000

Q Tighten the electrostatic panel and the electrostatic spring
together as shown below:
3. Upper cabinet unit (display section)
Q LCD fixing tape attachment reference
LCD fixing tape
X Do not extend from the display.
Q Back up tape and protection tape attachment reference
Lowest
reference
of the
display
window
-
/ 36.J-q
0 Fold the key sheet tab as shown below and fix with a screw.
4. Upper cabinet unit (Keyboard section)
0 Batteryc
The key decoration panel of the ZQ-5000 is marked with stripe
pattern in the numeric key section, and that of the ZQ-5200 has
no pattern.
Attach two spacers to adjust warp of the hinge chassis A.
Attach a spacer to either side.
5. Others
@ For attachment of the LCD, align with the left upper reference as
shown below:
Reference
t--
When attaching the LCD, be careful
’ 0
’ I
I
not to cover the key sheet.
80
1
Q Battery lid insulation sheet attachment reference
Battery insulation sheet
9
Battery cover (Main)
Fo1d.I /
Reference
(Allowable shift, 0.5mm to the right and left)
0 Set t
lid.
QI Plact
slide1
Q lnser
batte
@ Attach t