SHERCO 290 ST User Manual

180
ST SERIES
GEARS AND CRANKSHAFT
- Remove and put away the 2 centring
devices.
- Remove the adjustment washers.
- Remove the axles from the forks.
- Remove the two upper forks.
- Remove the desmodromic drum and the
third fork.
- Remove the complete gear pinion
assembly.
- Dismantle the primary axle using the
4521200 Knipey pliers.
- Repeat the operation with the secondary

SHERCO 290 ST Specifications

General

Brand	SHERCO
Model	290 ST
Category	Motorcycle
Language	English