12 13
Section 1 Be sure to observe for safe operation
4. Transporting the machine
Warning
Do not operate the machine by inertia on the footboards.
Operate the machine on a slope or footboards carefully. Avoid operate it by inertia with the
speed change lever at the neutral position.
[If you do not observe these cautions:]
Machine may run down the slope by its own weight and roll down.
Use footboards with sufficient strength, length and width.
Load or unload the machine on a flat place clear of traffic danger, after stopping the engine of
the truck, applying the side brake and choke to the wheel. Select footboards with sufficient
width, length and strength and not slipping.
[If you do not observe these cautions:]
Fall down or other accident may result.
Load the machine by reversing and unload by forwarding.
Load the machine onto the truck by reversing it and unload it by forwarding.
[If you do not observe these cautions:]
The machine may lose balance and cause an accident, such as a fall down, etc.
Fix the machine to the truck with a rope.
When loading the machine onto the truck for transportation, apply the parking brake and fix
the machine to the truck with a strong rope.
[If you do not observe these cautions:]
The machine may fall down from the bed causing an accident.
To Next Page
Loading...
