V
Safety Precautions
■
Precautions Related to Installation Work
!
CAUTION
Do not connect anything other than peripheral devices specified by Shimadzu to the balance’s connector.
If you do, the balance may stop working normally. In order to avoid trouble, always connect peripheral devices
in accordance with the directions in this manual.
Instructions
Use the correct power supply and voltage with the AC adapter supplied.
Using the balance with an incorrect power supply or voltage may result in the outbreak of fire or malfunctions. Note also that if the power supply
or voltage is unstable or if the power supply capacity is insufficient, it will not be possible to obtain satisfactory performance from the balance.
Instructions
The included AC adapter is for use with this product only.
Do not use the included AC adapter with any other devices. Doing so could cause fires or other damage.
Instructions
Install measures to prevent the balance from toppling over in the event of earthquakes, etc.
If the balance topples over as a direct result of vibrations, it may result in injury.
Plug the AC adapter into an easily accessible power outlet.
During emergencies, it is necessary to unplug the AC adapter from the power outlet.
Instructions
Beware of the gaps between equipment during installation.
Failure to observe this may result in fingers getting caught, leading to injury. Place fingers on the indentations
on the sides of the unit and grip it firmly with both hands during installation.
■
Precautions Related to Work/Operations
!
CAUTION
Use the correct weighing units.
Using incorrect weighing units can lead to accidents as a result of weighing errors. Check that the weighing
units are correct before starting weighing.
Instructions
Treat the balance with care and respect.
The balance is a precision instrument. Subjecting it to impact may result in malfunctions. When moving the balance, remove the pan,
the pan supporter the shield plate, fix the glass draft shield, the Draft shield inner plate, the Power pack, the Stage, the Shield case
and the Multi-stand, etc in place, and grasp it firmly with both hands when carrying it. If the balance is to be stored for long periods of
time, place it in the packaging box which was used for delivery and store it in a safe location with few temperature fluctuations.
■
Risks Involved in Repairs/Dismantling/Modifications
!
CAUTION
Prohibitions
Never disassemble, modify or attempt to repair this product or any accessory.
You could sustain an electric shock or the product could operate abnormally. If you believe that the balance
has failed, contact your Shimadzu representative.
To Next Page
Loading...
Need help?
General
