Shimano Steps BT-E8016 - List of Tools to Be Used

13
List of tools to be used
List of tools to be used
The following tools are needed for installation/removal, adjustment, and maintenance
purposes.
Component Location used/screw
type
Tool
Electric wire
(EW-SD50)
Plug
TL-EW02
Electric wire
(EW-SD300)
Plug
TL-EW300
Battery mount
(BM-E6000)
Key unit
Cross head screwdriver [#2]
Slotted screwdriver (6.5 mm)
Lower case
Cross head screwdriver [#2]
Upper case
Hexalobular [#10]
Battery mount
(BM-E6010)
Lower case
Key unit
3 mm hexagon wrench
Key unit
(adjust installation
location)
TL-BME01
Key unit cover
Upper case
Cross head screwdriver [#1]
Battery mount
(BM-E8010 / BM-E8016)
Lower case
3 mm hexagon wrench
8 mm spanner
Key unit
3 mm hexagon wrench
Key unit
(adjust installation
location)
TL-BME02
Key unit cover
Upper case
2.5 mm hexagon wrench