Shimano Steps BT-E8016 - Battery Mount Installation

22
Installation/removal
Installing the battery mount
Installing the battery mount
Rear carrier mount type
` BM-E6000
1. Install the key unit to the lower case.
Key unit mounting screw A (one-way type)
Key unit mounting screw B
Key unit
1.6 - 1.8 N·m
1.6 - 1.8 N·m
Lower case
2. Set the plug unit to the lower case, and install it to the battery rail.
(1) Set the plug unit to the lower case.
(2) Set the battery rail to the lower case. Be careful not to pinch the power cord between
the lower case and battery rail.