Shimano Steps BT-E8016 - Integrated Mount Type

35
Installation/removal
Installing the battery mount
(4) Pass the power cord through the frame and leave it hanging over the drive unit
installation area.
0.6 N·m
Upper case mounting screw
Bellows
Upper case
Lower case
Power cord
(3)
(2)
(1)
BM-E8010
0.6 N·m
0.6 N·m
BM-E8016
Bellows
Upper case
Power cord
Upper case mounting screw B (M3 x 9 mm)
(3)
(2)
(1)
Lower case
Upper case mounting screw A (M3 x 5 mm)(3)
Integrated mount type
Depending on the frame, it may be installed at a location different from the position specified
in this section.