47
Installation/removal
Installing the battery mount
(2) Check that the SHIMANO original tool is making firm and even contact with the
contact surface, then secure the lower bracket.
Lower bracket mounting screw
Contact surface Contact surface
4.5 N·m
TL-BME04-L / TL-BME05-L
7. Install the connector unit.
The cables may need to be connected prior to installing the connector unit, depending on
the frame design.
(1) Push the connector unit into the lower bracket.
(2) Use the limit screw to secure the connector unit.
Limit screw
1 N·m
To Next Page
Loading...
