50
Installation/removal
Installing the satellite system ON/OFF switch
• The electric wire of the satellite system ON/OFF switch is connected to junction [B] in the
figure, but it can be connected directly if there is a free E-TUBE port on the drive unit.
Electric wire of satellite system ON/OFF switch
Junction [B] SM-JC41 (EW-SD50 type)
EW-JC304 (EW-SD300 type)
2. Install the satellite system ON/OFF switch.
Satellite system ON/OFF switch
mounting screw
0.6 N·m
NOTICE
• This may vary depending on the design of the frame. For example, there may or
may not be an adapter, or the hook may differ. Contact a distributor for details.
Adapter
Hook
Hook
To Next Page
Loading...
