55
Maintenance
Charging of the satellite system ON/OFF switch
If E-TUBE PROJECT for Windows is version 4.0.2 or later
Click [Error check] on the [MAINTENANCE] tab. Next, check the state of the satellite
system ON/OFF switch on the screen and click [Charge].
• The estimated time until charging is complete is displayed on the screen.
• The LED lamp on the satellite system ON/OFF switch flashes while charging. When
charging is complete, the LED turns off.
NOTICE
• If charging the satellite system ON/OFF switch is difficult using any of the
methods shown in this section due to the specifications of the bicycle, etc.,
consult a distributor.
To Next Page
Loading...
